| vacancies |  events | 


Mooring Equipment

The Blue Deep Badinotti Group ’s brand aquaculture line includes most of the fish farming mooring equipment that each farmer needs, likes: anchors, new and used chains, shackles, ropes, etc.

An italian stock warehouse give you the possibility to satisfy your order request in 24/48 h.

Badinotti can supply ready for use mooring line including rope spliced with thimble, ring and mooring shackle.
Stingray special anchors



The drag anchors are the most popular type of anchoring device available today.
This type of anchor is designed to penetrate the
seabed, either in whole or in part.

The ability to drag and the sinking is still generated by the resistance of the soil, which is opposed to the motion of sinking it.
 
Dragging anchors, such as Stingray, are particularly suited to resist large horizontal loads, but not for large vertical loads.

In the picture on the side is given an anchor of its collapse stingray from 375kg to sandy bottom.








The light weight and the high capacity required on the bottom make it ideal anchors for mooring facilities for fish farming, especially in exposed sites or better defined as OFF-SHORE.
Anchors for sandy or muddy sea bottom

SM12 model with a weight ranging from 150 kg to 1000 kg with max loads required from 19.3 to over 68 tons, is a multipurpose anchor, particularly suitable for bottoms of sand and/or mud.
The table below shows the difference in weight between Stingray anchors and Samson 12 (traditionally used in fish farming mooring) for the same load required.
COMPARISON TABLE BETWEEN STINGRAY AND SAMSON12 ANCHORS
Loading Power Models
Stingray 375kg Samson 545kg
MAX [Ton] 42,64 43,1
Mud-sand ground [Ton] 23,84 10,09
Stingray 500kg Samson 600 e 700kg
MAX [Ton] 53,6 48,7 and 53,9
Mud-sand ground [Ton] 29,97 12 and 14
Stingray 750kg Samson 849 - 900 e 1000kg
MAX [Ton] 73,00 58 - 63,7 and 68,7
Mud-sand ground [Ton] 41,37 13,9 - 15,28 and 16,48
Stingray 1000kg No equiv
MAX [Ton] 93
Mud-sand ground [Ton] 52
Stingray 1500kg NO equiv
MAX [Ton] 128,37
Mud-sand ground [Ton] 71,78
BOW SHACKLE
Circular eyed pin

Safety factor = 6
Finish: Hot Galvanized
Material: high strength forged steel

BOW SHACKLE
Bolt type

Safety factor = 6
Finish: Hot Galvanized
Material: high strength forged steel


BOW SHACKLE
HIGH STRENGTH GRADE 80

Safety factor = 5.5
Finish: Hot Galvanized
Material: high strength forged steel

BOW SHACKLES (Bolt type/Circular eyed pin)
S.W.L. A B C D O Weight
[Ton] [mm] [mm] [mm] [mm] [mm] [Kg]
2 13 16 22 51 32 0,360
3,25 16 19 27 64 43 0,620
4,75 19 22 31 76 51 1,210
6,5 22 25 36 83 58 1,480
8,5 25 28 43 95 68 2,500
9,5 28 32 47 108 75 3,465
12 32 35 51 115 83 4,500
13,5 35 38 57 133 92 6,600
17 38 42 60 146 99 7,150
25 45 50 74 178 126 13,240
35 50 57 83 197 138 19,000
42,5 57 65 95 222 160 28,000
55 65 70 105 254 180 38,500
85 75 83 127 330 190 62,300
BOW SHACKLES  HIGH STRENGHT GRADE 80
(Bolt type/Circular eyed pin)
S.W.L. A B C D O Weight
[Ton] [mm] [mm] [mm] [mm] [mm] [Kg]
30 38 42 60 146 99 8,800
40 45 51 74 178 126 15,500
55 50 57 83 197 138 20,650
85 65 70 105 254 180 41,000
THIMBLE

Finish: Hot Galvanized
Material: Forged Steel.
The thimbles are "Heavy type" and could be ordered even with the tips cut off.

THIMBLES
A E L Weight
[mm] [mm] [mm] [Kg]
14 36 57 0,110
16 40 62 0,170
18 46 72 0,215
20 52 82 0,285
22 55 87 0,385
24 58 92 0,485
26 65 103 0,505
28 68 105 0,530
30 70 115 0,870
32 82 130 0,950
35 90 140 1,150
40 100 160 1,700
45 117 185 2,100






CIRCULAR RING

Finish: Painting or Hot dipped galvanized steel
Material: Forged Steel

CIRCULAR RINGS
A D Weight
[mm] [mm] [Kg]
6 60 0,090
8 80 0,165
10 120 0,175
12 90 0,280
14 90 0,390
20 150 1,280
22 250 2,480
25 300 4,000



CHAIN USED

Finish: raw, tar black
Material: Steel
Availability varies with time.
Type: Open link or Studlink

The chain can be supplied with tar treatment.

NEW CHAIN GRADE 80
HIGH STRENGHT

Finish: Painting
Material: Steel grade 80

CHAIN GRADE 80 - HIGH STRENGHT
A E L S.W.L.
 B.L. Weight
[mm] [mm] [mm] [Ton] [Ton] [Kg]
10 15 40 2,514 12,570 2,207
13 19,5 52 4250 21,240 3,720
16 24 64 6,435 32,175 5,640
19 28,5 76 9,000 45,370 7,140
NEW CHAIN

Finish: Painting
Material: Raw, Black or hot galvanizing.




CHAIN: RAW - BLACK - HOT GALVANIZED
D E S.W.L. B.L. Weight
[mm] [mm] [mm] [Ton] [Kg]
6 7,8 0,560 1,410 0,820
8 10,4 1,000 2,510 1,450
10 13 1,500 3,920 2,250
12 15,6 2,250 5,650 3,240
14 18,2 3,000 7,670 4,390
16 20,8 4,000 10,050 5,710
18 23,4 5,000 12,720 7190
20 26 6,260 15,650 8,830
22 28,6 7,600 19,000 10,700
24 31,2 9,040 22,600 12,700
OVAL RING

Finish: Painting
Material: Forged Steel
OVAL RINGS
A E L S.W.L.
 B.L. Weight
[Ton] [Ton] [Kg]
10 15 40 2,500 12,500 0,080
13 19 52 4,300 21,500 0,175
16 24 64 6,500 32,500 0,325
19 30 76 9,200 46,000 0,650
22 40 100 10,000 50,000 0,900
25 40 100 11,000 55,000 1,300
28 45 100 12,000 60,000 1,700
30 50 110 13,000 65,000 2,100
SWIVEL

Finish: Painting
Material: high strength forged steel 85/100 kg.

Upon request we can provide swivels with SWL more than 4 tons.
SWIVELS
A D E L S.W.L.
 B.L. Weight
[mm] [mm] [mm] [mm] [Ton] [Ton] [Kg]
16 35 35 130 2,500 15,000 0,900
18 40 38 14 3,250 19,500 1,200
20 45 43 165 4,000 24,000 1,650
MOORING BUOYS
Mod CB

Rotational moulded buoys produced according to the Norwegian
standard NS-9415. The buoys are delivered with continuous hot dipped
galvanized steel armature, and they are fully foamfilled with expanded
polystyrene (EPS).
CB-buoys: Cylindrical buoys with hot dipped galvanized steel armature
with swivel joint at the end to ensure an optimal mooring.
Sizes; CB260, CB440, CB680, CB1100 and CB1800
MOORING BUOYS
Mod LAB

LAB-buoys: hot dipped galvanized steel armature consisting of 4
continuous bolts / rods as well as strong end plates with mooring eye.
Sizes from 380 up to 4200 kg buoyancy.
DEEP BLUE MOORING BUOY
Mod POLY

Buoy polyethylene rotational moulded filled with polystyrene foam 15 kg / c.mt.
6 mm shell thickness.
Available models:


>> BD-POLY 1100 ltrs
>> BD-POLY 1500 ltrs
>> BD-POLY 2000 ltrs
BLUE DEEP MOORING BUOY
Mod. NORD

Buoy polyethylene rotational moulded filled with polystyrene foam 15 kg / c.mt.
8 mm shell thickness.
Available models:

>> BD-NORD 600 ltrs
>> BD-NORD 1000 ltrs
>> BD-NORD1B 1000 ltrs
BLUE DEEP MOORING BUOY
Mod. BB

Buoy polyethylene rotational moulded filled with polystyrene foam 40 kg / c.mt.
6 mm shell thickness.
Available models with the following bouyancy:

250-475-700-925-1150-1315-1600
TWISTED AND BRAIDED ROPES

The ropes used in the mooring lines in fish farming are generally twisted POLYSTEEL ropes. This fiber is produced by polipropylene + high-density polyethylene extruded yarns.
These fibers, mixed together, give a tensile strength of about 20-25% higher than the polypropylene rope, keeping the same specific weight.
Rope are also available in Nylon, Dyneema ©, Polyester and Polypropylene.

Can be provided ready for use mooring lines completed of thimble, splicing, and oval ring.

 POLYSTEEL ROPE
Diameter B.L.  Roll weight x 100 mts Tollerancy
[mm] [daN] [kg] [%]
4 311 0,8 10%
5 436 1,1
6 680 1,7
7 917 2,3
8 1190 3,0
9 1495 3,8 8%
10 1780 4,5
12 2590 6,5
14 3540 8,9
16 4490 11,6 5%
18 5720 14,8
20 6830 18,1
22 8340 22,1
24 9780 26,3
26 11300 30,3
28 12800 35,6
30 14600 41,1
32 15300 45,3
34 17333 51,7
36 19270 57,3
38 21411 63,8
40 24200 71,9
42 26060 79,8
44 29000 87,6
46 31247 95,7
48 33700 104,4
50 36903 113,0
52 39000 122,5
56 44700 142,5
60 51000 163,6
64 58000 185,9
72 72500 235,0
80 89000 291,2
88 106740 352,3
96 126000 418,6
  


Top »


Products

disclaimer |  photo credits |  privacy | 

Design by A.Ciattaglia
BADINOTTI 2011©, All Rights Reserved.